Stamping plate DARK India

DARK PLATE - metal plate for creating designs using the "stamping" technique. It has deep and clear patterns for easy work. A wide selection of designs allows you to quickly and easily create any pattern. DESCRIPTION - has quality engraving for convenient work; - allows even complex designs to be made without drawing skills; - recommended to use together with DARK STAMPING POLISH and DARK Stamping Tool. APPLICATION METHOD 1. Perform a manicure and apply base/gels or color, dry in the lamp; 2. If there is a sticky layer - remove the sticky layer with DARK GEL CLEANSER; 3. Apply polish to the plate, scrape off excess with a scraper and transfer the pattern onto the stamp; 4. Transfer the pattern from the stamp to the nail with a rolling or even motion; 5. Cover with top coat (if the top runs from the pattern - apply a thin layer of clear base coat, and then the top coat). WHY THE PATTERN MAY NOT TRANSFER ONTO THE STAMP 1. The polish should not be too thick, you need to pick up a sufficient amount of polish on the brush for even distribution over the pattern; 2. Apply polish to the plate with 1-2 motions, the longer you apply the polish, the more chances that the transfer will be worse as the polish dries in the air; 3. Work with the scraper at an angle of approximately 45 degrees, without pressing hard so as not to "squeeze" the polish out of the pattern; 4. Work quickly with the scraper (2-4 motions are enough) without sweeping over the entire plate; 5. Then quickly set the scraper down and take the stamp in hand (remember that we don’t have extra time when working with polishes); 6. Transfer the pattern to the stamp with a gentle rolling motion, DO NOT try to push the stamp hard into the plate, the more you press, the more polish will remain in the plate.