Stamping plate DARK 13

DARK PLATE - metal plate for creating designs in the "stamping" technique. It has deep and clear patterns for convenient work. A wide selection of designs allows you to quickly and easily create any pattern. DESCRIPTION - have quality engraving for convenient use; - allow even complex designs to be made without drawing skills; - we recommend using together with DARK STAMPING POLISH and DARK stamping tool. APPLICATION METHOD 1. Perform a manicure and apply base/gell or color, dry in a lamp; 2. If there is a sticky layer - remove the sticky layer using DARK GEL CLEANSER; 3. Apply polish to the plate, scrape off the excess with a scraper and transfer the pattern to the stamp; 4. Transfer the pattern from the stamp to the nail with a rolling or flat motion; 5. Cover with top (if the top runs off the pattern - apply a thin layer of clear base first, then the top). WHY CAN'T THE PATTERN BE TRANSFERRED ON THE STAMP 1. The polish should not be thickened, you need to pick up enough polish on the brush to distribute it over the pattern; 2. Apply polish to the plate with 1-2 movements, the longer you apply polish - the more likely it is to transfer worse because the polish dries in the air; 3. Work with the scraper at an angle of about 45 degrees, and do not press hard to avoid "squeezing" the polish out of the pattern; 4. Work quickly with the scraper (2-4 movements are enough), do not make a sweeping motion across the entire plate; 5. Then quickly put down the scraper and take the stamp in your hand (remember, we don't have extra time when working with polishes); 6. Transfer the pattern to the stamp with a soft rolling motion, DO NOT try to press the stamp hard into the plate; the more you press - the more polish will remain in the plate.