Drill bit DARK Rounded Cylinder 3.9x12 mm (Red)

Description 

Rounded cylinder bit will help to carefully and quickly perform manicure and pedicure, in hardware and combined manicure/pedicure techniques, effectively lifts and cleans the cuticle, grinds rough skin in the area of lateral ridges and sinuses. Suitable for beginners, as well as for experienced manicure masters.

Characteristics:

• High quality of diamond coating;
• Withstand dry heat processing;
• Do not rust during sterilization;
• Have uniform diamond spraying;
• Will help to carefully and quickly perform manicure and pedicure in hardware and combined manicure/pedicure techniques;
• Resistant to temperature, moisture and steam;
• Diamond particles are additionally sieved, therefore they have the same geometric shape and are ideally uniformly sprayed onto the bit;
• The base of each bit is checked for radial runout;
• The spraying is checked under a microscope.

Red notch: Suitable for working with normal, thin, soft and sensitive skin, as well as for processing light roughening, calluses and cracks, finish grinding.

Recommendations for use:

• Rotations: 5 - 15 thousand for devices with power of 30 - 65 watts;
• Disinfection: disinfecting solution or a special solution for processing bits.

We do not recommend cleaning diamond bits with metal brushes, it is better to use a plastic brush with stiff bristles.

• Sterilization: autoclave or dry heat, necessarily pre-drying on the drying mode in a dry heat/UV lamp for tool storage or just in the air (in a separate clean area) for at least 6 hours.