DARK IRON gel - a thick gel-like consistency
- holds shape well, allowing to build corners and extend length in the air;
- strong, holds sharp corners that do not wear off;
- holds the arch well.
APPLICATION METHOD
1. Prepare the nail plate with a 180/240 grit file (there should be no pterygium, remover, or moisture left on the nail);
2. Degrease well;
3. For adhesion, apply SCOTCH BASE in a thin layer over the entire nail plate close to the cuticle and to the side rollers, we recommend removing the sticky layer from the base for better adhesion before applying the hard material (or working with mechanical preparation);
4. Perform strengthening or modeling of nails, filing;
5. Polymerization time 90 seconds at a power of 48 watts;
6. Cover with gel/base/top - depending on the technique used. Dry the top for 90 seconds.
- IF WE PERFORM strengthening - we must file our nail at least 1 mm from the inside to avoid detachment from the free edge.
We do not recommend Iron gel for full forms (can only be used with quality lamps).
All DARK hard materials are NON-acidic.
It has European and Ukrainian quality certificates, the product is registered in the CPNP system, all DARK products are NOT tested on animals.
IMPORTANT NUANCES
Before use, carefully read the application method. If you have allergies or individual intolerance to any components of this product, its use is prohibited. In such cases, be sure to consult a doctor before use.
The manufacturer may change the composition of the means to improve the formula. The latest list of components can always be found on the product packaging.
The color in the picture may slightly differ from the product.
Is not a medicinal product.
Main ingredients Acrylates Copolymer, Hema, Ethyl Trimethylbenzoyl Phenylphosphinat.
The full composition of the product is indicated on the label. If the client wishes to familiarize themselves with the full composition before purchasing the product, a complete composition may be provided upon request prior to the purchase of the product.