DARK 14 stamping plate

DARK PLATE - metal plate for creating designs in the "stamping" technique. It has deep and clear patterns for convenient work. A large selection of designs allows you to quickly and easily create any pattern. DESCRIPTION - have quality engraving for ease of use; - allow for even complex designs without drawing skills; - we recommend using it together with DARK STAMPING POLISH and DARK Stamping Tool. APPLICATION METHOD 1. Perform a manicure and apply base/gell or color, dry in the lamp; 2. If there is a sticky layer - remove it with DARK GEL CLEANSER; 3. Apply polish to the plate, remove excess with a scraper and transfer the pattern to the stamp; 4. Transfer the pattern from the stamp to the nail with a rolling or flat motion; 5. Top coat (if the top runs off the pattern - cover with a thin layer of transparent base first, and then the top). WHY THE PATTERN MAY NOT TRANSFER TO THE STAMP 1. The polish should not be thickened, you need to pick up enough polish onto the brush to distribute over the pattern; 2. Apply polish to the plate in 1-2 strokes; the longer you apply polish, the higher the chances that the transfer will be worse because the polish dries in the air; 3. Work with the scraper at an angle of about 45 degrees, without pressing so as not to "squeeze" the polish out of the pattern; 4. Work quickly with the scraper (2-4 strokes are enough), without sweeping across the entire plate; 5. Next, quickly put down the scraper and take the stamp in your hand (remember that when working with polishes - we don’t have extra time); 6. Make the transfer of the pattern to the stamp with a soft rolling motion, DO NOT TRY TO PRESS the stamp hard into the plate, the more you press - the more polish will remain in the plate.