Stamping plate DARK 13

Description 

DARK PLATE - a metal plate designed for creating nail designs using the 'stamping' technique. It features deep and precise engravings for convenient use. A wide variety of designs allows you to quickly and easily create any pattern.

DESCRIPTION
- High-quality engraving for comfortable work;
- Enables even complex designs without drawing skills;
- Recommended to use with DARK STAMPING POLISH and DARK Stamper for stamping.

HOW TO USE
1. Prepare the manicure, apply base/gel or color, and cure under a lamp;
2. If a sticky tacky layer is present, remove it using DARK GEL CLEANSER;
3. Apply polish to the plate, scrape off the excess with a scraper, and transfer the design onto the stamper;
4. Transfer the design from the stamper to the nail using a rolling or straight movement;
5. Apply a top coat (if the top coat runs off the design, apply a thin layer of clear base first, then the top coat).

WHY THE DESIGN MIGHT NOT TRANSFER TO THE STAMPER
1. The polish should not be too thick; apply enough polish to the brush to adequately cover the design;
2. Apply polish to the plate in 1-2 motions; the longer it takes, the less likely the design will transfer clearly, as the polish dries in air;
3. Use the scraper at an approximately 45-degree angle without pressing hard to avoid pushing the polish out of the design;
4. Work quickly with the scraper (2-4 passes are enough), without making sweeping motions across the entire plate;
5. Quickly set aside the scraper and take the stamper in hand (remember, when working with polish, you have limited time);
6. Transfer the design to the stamper with a gentle rolling motion; do NOT try to press the stamper too hard onto the plate-the more you press, the more polish remains on the plate.