DARK 09 stamping plate

DARK PLATE - metal plate for creating designs in the 'stamping' technique. It has deep and clear patterns for convenient work. A wide selection of designs allows you to quickly and easily create any pattern. DESCRIPTION - features quality engraving for convenient work; - allows for complex designs to be made without drawing skills; - recommended to use together with DARK STAMPING POLISH and DARK stamping tool. APPLICATION METHOD 1. Perform a manicure and apply base/gell or color, dry in the lamp; 2. If there is a sticky layer, remove it with DARK GEL CLEANSER; 3. Apply polish on the plate, scrape off the excess with a scraper, and transfer the pattern to the stamp; 4. Transfer the pattern from the stamp to the nail using a rolling or flat motion; 5. Top coat (if top coat runs off the pattern, apply a thin layer of clear base first, then top coat). REASONS WHY THE PATTERN MAY NOT TRANSFER TO THE STAMP 1. The polish should not be thickened, pick up enough polish on the brush to distribute it over the pattern; 2. Apply polish to the plate in 1-2 strokes, the longer you apply the polish, the more chances there are that the transfer will be worse because the polish dries in the air; 3. Use the scraper at an angle of approximately 45 degrees, without pressing hard to avoid 'squeezing' the polish out of the pattern; 4. Work quickly with the scraper (2-4 strokes are enough), without sweeping over the entire plate; 5. Next, quickly put down the scraper and pick up the stamp (remember that we don't have extra time when working with polishes); 6. Make the transfer of the pattern to the stamp with a soft rolling motion, DO NOT try to PRESS the stamp into the plate, the more you press, the more polish will remain on the plate.