Stamping plate DARK 08

DARK PLATE - metal plate for creating designs in the "stamping" technique. It has deep and clear patterns for convenient work. A wide selection of designs allows you to quickly and easily create any pattern. DESCRIPTION - have quality engraving for convenient work; - allow you to create even complex designs without drawing skills; - we recommend using together with DARK STAMPING POLISH and DARK stamping stamp. METHOD OF USE 1. Perform a manicure and apply base/gel or color, cure in the lamp; 2. If there is a sticky layer - remove the sticky layer with DARK GEL CLEANSER; 3. Apply polish to the plate, remove the excess with a scraper and transfer the pattern to the stamp; 4. Transfer the pattern from the stamp to the nail with a rolling or even motion; 5. Cover with top (if the top runs off the pattern - apply a thin layer of clear base first, and then top). WHY THE PATTERN MAY NOT TRANSFER ONTO THE STAMP 1. The polish should not be thickened; you need to pick up enough polish on the brush for it to be enough to distribute over the pattern; 2. Apply polish to the plate with 1-2 movements; the longer you apply the polish, the more chances there are that the transfer will be worse because the polish dries in the air; 3. Work with the scraper at an angle of about 45 degrees, without pressing too hard, to avoid "squeezing" the polish out of the pattern; 4. Work quickly with the scraper (2-4 movements are enough), without sweeping across the entire plate; 5. Next, you need to quickly set down the scraper and pick up the stamp (remember that when working with polishes, we do not have extra time); 6. Make the transfer of the pattern to the stamp with a soft rolling motion; DO NOT TRY TO PRESS the stamp hard into the plate, the more you press, the more polish will remain in the plate.