Stamping plate DARK 07

DARK PLATE - metal plate for creating designs in the stamping technique. It has deep and clear patterns for convenient work. A large selection of designs allows for quick and easy creation of any pattern. DESCRIPTION - has quality engraving for convenient work; - allows creating even complex designs without drawing skills; - recommended to use together with DARK STAMPING POLISH and DARK Stamping Tool. APPLICATION METHOD 1. Perform manicure and apply base/generate or color, dry in the lamp; 2. If there is a sticky layer, remove the sticky layer using DARK GEL CLEANSER; 3. Apply polish on the plate, scrape off the excess with a scraper and transfer the pattern to the stamp; 4. Transfer the pattern from the stamp to the nail with a rolling or even motion; 5. Cover with top coat (if the top runs off the pattern - apply a thin layer of clear base first, and then top coat). REASONS WHY THE PATTERN MAY NOT TRANSFER ONTO THE STAMP 1. The polish should not be thickened, apply enough polish on the brush so that it is enough for distribution across the pattern; 2. Apply the polish on the plate with 1-2 strokes, the longer you apply, the more chances that the transfer will be worse because the polish dries in the air; 3. Work with the scraper at an angle of approximately 45 degrees, without pressing too hard, to avoid "squeezing" the polish out of the pattern; 4. Work with the scraper quickly (2-4 strokes are enough) and do not make sweeping motions across the entire plate; 5. Then quickly place the scraper and grab the stamp (remember that we don't have extra time when working with polishes); 6. Make the transfer of the pattern to the stamp with a gentle rolling motion, DO NOT press hard on the stamp into the plate, the more you press, the more polish will remain in the plate.