Stamping Plate DARK 05

DARK PLATE - metal plate for creating designs in the "stamping" technique. It has deep and clear patterns for convenient work. A wide selection of designs allows you to make any pattern quickly and easily. DESCRIPTION - has quality engraving for convenient work; - allows you to create even complex designs without drawing skills; - we recommend using it together with DARK STAMPING POLISH and DARK Stamping Stamp. APPLICATION METHOD 1. Perform a manicure and apply base/gel or color, cure in the lamp; 2. If there is a sticky layer - remove the sticky layer using DARK GEL CLEANSER; 3. Apply polish on the plate, scrape off the excess with a scraper and transfer the pattern to the stamp; 4. Transfer the pattern from the stamp to the nail with a rolling or flat motion; 5. Apply top coat (if the top runs off the pattern - go over it with a thin layer of clear base first, and then top coat). REASONS WHY THE PATTERN MAY NOT TRANSFER TO THE STAMP 1. The polish should not be thickened; you need to pick up enough polish on the brush to cover the pattern; 2. Apply polish on the plate with 1-2 movements; the longer you apply, the higher the chances it won't transfer well because the polish dries in the air; 3. Work with the scraper at an angle of approximately 45 degrees, and do not press hard to avoid "squeezing" the polish out of the pattern; 4. Work with the scraper quickly (2-4 movements are enough), and do not sweep across the entire plate; 5. Next, quickly put down the scraper and take the stamp in hand (remember that when working with polishes, we do not have extra time); 6. Transfer the pattern to the stamp with a soft rolling motion; DO NOT try to press the stamp hard into the plate; the more you press, the more polish will remain on the plate.