Stamping Plate DARK 04

DARK PLATE - metal plate for creating designs in the "stamping" technique. It has deep and clear patterns for easy work. A large selection of designs allows you to quickly and easily create any pattern. DESCRIPTION - features high-quality engraving for convenient use; - allows you to create even complex designs without drawing skills; - recommended to use together with DARK STAMPING POLISH and DARK Stamping tool. APPLICATION METHOD 1. Perform manicure and apply base/gel or color, cure in the lamp; 2. If there is a sticky layer - remove it using DARK GEL CLEANSER; 3. Apply polish on the plate, use a scraper to remove the excess and transfer the pattern to the stamp; 4. Transfer the pattern from the stamp to the nail with a rolling or flat movement; 5. Cover with top coat (if top coat runs off the pattern - apply a thin layer of clear base first, then top coat). WHY THE PATTERN MAY NOT TRANSFER ONTO THE STAMP 1. The polish should not be thickened; pick up enough polish on the brush for distribution over the pattern; 2. Apply polish on the plate with 1-2 movements; the longer you take, the higher the chance of a poor transfer, as polish dries in the air; 3. Work with the scraper at an angle of approximately 45 degrees, without pressing down hard so as not to "squeeze" the polish out of the pattern; 4. Work quickly with the scraper (2-4 movements are sufficient), without making wide strokes across the plate; 5. Next, quickly put down the scraper and take the stamp in hand (remember, when working with polishes, we don't have extra time); 6. Transfer the pattern to the stamp with a soft rolling motion; DO NOT try to PRESS the stamp hard into the plate; the harder you press, the more polish will remain in the plate.