DARK Stamping polish №24 neon yellow, 10 ml

STAMPING POLISH DARK - these are stamping polishes that transfer easily with proper use, have a wide palette and rich pigmentation. They are not thick and work with all types of stamps. APPLICATION METHOD - perform a manicure and apply a base/gell or color, cure in a lamp; - if there is a sticky layer - remove the sticky layer with DARK GEL CLEANSER; - apply polish to the plate, scrape off the excess with a scraper, and transfer the design to the stamp; - transfer the design from the stamp to the nail with a rolling or even motion; - topcoat (if the topcoat runs off the design - cover with a thin layer of clear base, and then topcoat). REASONS WHY THE DESIGN MAY NOT TRANSFER TO THE STAMP 1. The polish should not be thickened, enough polish should be picked up on the brush to spread over the design; 2. Apply polish to the plate in 1-2 strokes, the longer you apply the polish, the more chances there are that the transfer will be worse, because the polish dries in the air; 3. Work with the scraper at an angle of about 45 degrees, without pressing down, to avoid 'squeezing' the polish out of the design; 4. Work with the scraper quickly (2-4 strokes are enough), without making wide strokes across the entire plate; 5. Then quickly place the scraper down and take the stamp in hand (remember, when working with polishes - we don't have extra time); 6. Transfer the design to the stamp with a soft rolling motion, NO NEED to press the stamp hard into the plate, the more you press - the more polish will remain in the plate. Volume - 10 ml. The Stamping polish from Dark will add bright accents to your manicure. Features of Dark Stamping polish ● have a moderately thick consistency and dense texture; ● have high pigmentation; Application technology for Dark Stamping polish ● apply base or color ● cure in a lamp ● remove sticky layer if present ● transfer design ● topcoat if the topcoat runs off the design - cover with a thin layer of clear base